ADS, INC. "SPRING HAS SPRUNG" SPECIALS ARE COMING SOON!

*Effective Dates: 5-25-2026 through 6-30-2026

Please note that our shopping cart is under construction and being updated. To order please contact your favorite authorized distributor. You may also contact ADS, Inc. at 800-558-5925 to place an order and ADS will bill through your favorite dealer!

CUSTOM PEG® II INSTANT REFRACTORY MATERIAL

CREATE FIRING PEGS FOR ZIRCONIA, DISILICATES, PORCELAIN

• Creates custom firing pegs for all ceramic restorations; i.e. zirconia, lithium disilicate, pressable ceramics (Cerpress® SL), porcelain laminates, porcelain jacket crowns

• Use as investment to repair cracked pressable ceramic restorations

• Soft creamy consistency, is not firm or sticky

• Remains stable to 1926°C / 3500°F - does not ship in freezing temperatures without heat packs.

MADE IN U.S.A.

420107.....3-Pack of 12 cc Syringes

420100.....1-12 cc Syringes

TARTAR & STAIN REMOVER® CONCENTRATE ULTRASONIC CLEANER

• Instantly dissolves tartar off dentures, bite plates, and partials

• Excellent for removal of tartar and stains, cleans metal oxides, permanent cements, dissolves solder flux and calcium hydroxides

• For deep down cleaning of soiled prosthesis

MADE IN U.S.A.

N928-6.....Quart Concentrate

N928-8.....Gallon Concentrate

DIE EEZ® "ORIGINAL" DIE LUBRICANT

• Recommended for all types of dies

• Flows smoothly, covering any type of surface

• Forms a uniform thin film never losing detail or fit, and is especially important in deep critical areas

• Does not dissolve or distort wax

• Carries away surface contamination when rinsed off with water. May be painted on, sprayed or dipped.

Compatible with all Die Spacers.

MADE IN U.S.A.

D896-3.....4 oz.

D896-4.....8 oz.

D896-5.....16 oz.

CLEAR COAT® DIE AND MODEL HARDENER

• Instantly protects stone models and die materials

• Penetrates, creating a clear, hard, glossy, tough surface

• Prevents abrasion and chipping of dies

• Protects margins and critical areas

• Dries instantly and is waterproof

• Solvent is thinner; it removes Clear Coat from dies without damage

MADE IN U.S.A.

C760-1.....Kit (4 oz. Hardener and 4 oz. Solvent)

C760-2.....Model Hardener 4 oz.

C760-9.....Model Hardener 8 oz.

C760-3.....Model Hardener 16 oz.

C760-6.....Model Hardener Quart

C760-12....Model Hardener Solvent only, 1 oz.

C760-4.....Model Hardener Solvent only, 4 oz.

TWEEZERS, PACKET OF 2

HIGHLY DURABLE & ACID RESISTANT

• Will not corrode or cause flash plating.

• Ridged handles and serrated interlocking tip for secure holding of small workpieces.

• Blue 5" length.

T958-3.....5" Length, 2 Per Packet, Blue

DIAMOND POLISHING PASTE 2 GM OR 5 GM

FOR PORCELAIN AND CHROME

• The king of abrasives! Save money!

• Heavy concentration of super-fine diamond crystals in a non-greasy, water soluble base.

• Glaze adjusted areas and contacts on porcelain without refiring.

• Polish hard partial alloys to a final super luster, and rinse clean.

MADE IN U.S.A.

P322-1.....2 gram Syringe

P322-2.....5 gram Syringe

EEZ-OFF® RELEASE AGENT - UNIVERSAL MOLD RELEASING AGENT

• Non-oily, non-toxic universal anti-sticking agent

•  Forms a fine, super effective releasing and lubricating film

•  Pleasant aroma

•  Contains no silicones or chlorofluorocarbons to harm environment

•   Excellent stone to stone separator

•  Spray alginate impressions and flasks to release stone

•  Spray elastomer impressions to release die epoxy

•  Releases die pins from investment. Apply to trays, bowls, articulators, flasks, sprue formers, sinks and counters for quick clean ups

MADE IN U.S.A.

E806-4.....8 oz. Spray

ELECTRO POLISH SOLUTION GALLONS

FOR ALL CAST PARTIAL, CHROME COBALT ALLOYS

• Balanced electrolytic solution for final polishing of the cast to the finish desired

• Removes microscopic scratches and burs from tissue area of casts

• Reduces food retention and corrosion in patients mouth

• Eliminates need for additional mechanical polishing after preliminary finishing procedure

• Polishing time averages 6-10 minutes to achieve a smooth, high lustrous shine

• Ready to use

MADE IN U.S.A.

E937-8.....Gallon

ACRYLIC BONDER

• Enhances bond of acrylic to teeth. Prevents "pop outs".

• Use as a bonding agent in reline procedures.

• Convenient 1 oz. brush bottle.

• Refills available: 4 oz., 8 oz., and 16 oz.

MADE IN U.S.A.

A130-2.....1 oz.

A130-3.....4 oz.

A130-4.....8 oz.

TOTAL PURGE® FURNACE DECONTAMINATOR

CARBON-FREE FURNACE DECONTAMINATOR

• Traps contaminants, metal vapors, & acid gases in your ceramic oven caused by zirconia and lithium disilicates

• Eliminates discoloration of porcelain or zirconia

• Extends muffle life

• Kit contains ó lb. pellets, and Total Purge crucible

6 lb. = 40 uses

MADE IN U.S.A.

T305-1.....Total Purge Kit

T305-2.....6 lb. Refill

ACETONE U.S.P.

REAGENT GRADE

• 99.5% pure. Ships via ground only.

MADE IN U.S.A.

S883-1-5.....16 oz. Bottle

S883-1-6.....Quart (32 oz.) Bottle

STICK-TUIT® TEMPORARY ADHESIVE GEL

ADVANCED FORMULA

• Holds porcelain veneers, crowns, wax, and light metal parts during fabrication procedures

• Holds zirconia copings that are slightly loose on the die

• Easy to use and non-contaminating

MADE IN U.S.A.

499905.....2 - 12 cc Syringes

*Effective Dates: 5/25/2026 through 6/30/2026. Promotions may not be combined with any other offers. No substitutions allowed. Offers valid in the contiguous U.S. and Canada only. Must be redeemed within six weeks of dealer invoice date. No charge goods will be of equal or lesser value to the lowest selling unit price. Mail or fax authorized dental invoice to: American Dental Supply, Inc., 1075 N. Gilmore St., Allentown, PA 18109, Fax: 800-252-2822.

NEW! RELEASE-SEP® PLUS - MULTI-APPLICATION RELEASING SEPARATOR

✔ Releases stone from impression materials to create smooth, perfect models

✔ Releases waxes from dies and models

✔ Releases thermoformed materials and splints from models

✔ Releases alginate from impression trays

✔ Releases or separates stone and plaster

New! Release Sep Plus will not alter dimensions of dies. Release Sep Plus may be sprayed or painted on virtually any surface. The separating film is long lasting and durable and will not wash off with water. Release Sep Plus does not have to be reapplied for multiple releases. Available in 8 oz. or 16 oz.

NEW! TOTAL PURGE CARBON-FREE FURNACE DECONTAMINATOR

Dental lab technicians who work with modern materials like zirconia and lithium disilicate now have a by-product that is released in the ceramic oven...acid gas.

All technicians should use Total Purge in their ceramic ovens to keep the oven clean and maintained!

✔ Traps contaminants, metal vapors, and acid gases in your ceramic oven

✔ Eliminates discoloration of porcelain or Zirconia

✔ Extends muffle life

✔ 1/2 lb. = 40 uses

Kit contains: 1/2 lb. Total Purge, Total Purge 5 gm Crucible

NEW! PERFECT PRODUCTS FOR PRESSABLE PORCELAIN, ZIRCONIA ANDLITHIUM DISILICATE

Perfect Products include:

✔ Perfect Polish® Diamond Compound - Winner of Dental Advisor Editor's Choice Award and Dental Laboratory Product of the Year award for 2014.

✔ Perfect Ring® - Engineered for pressing lithium disilicate. 200 and 100 gram sizes available. American Dental Supply, Inc. will donate $1 for every unit sold to Breast Cancer Research.

✔ Perfect Powder® - Surface reaction layer inhibitor powder. Works well with most investments

✔ Perfect Divex Liquid® - Surface reaction layer inhibitor liquid

✔ Perfect Tooth Color Spacer® Kit of 11 Shades and Die Aid for translucent restorations like pressable porcelain, zirconia, and lithium disilicate

✔ Perfect Glaze® Paste Available in two formulas for MPC Perfect Glaze Paste® for metal and pressed ceramic, and EZ Perfect Glaze Paste® for zirconia and lithium disilicate. Perfect Glaze Paste is a ready-to-use premixed, smooth glaze. Provides a beautiful glaze in one firing. The pre-mix provides the exact consistency for every application. Firing instructions provided with purchase.

These products now available through your favorite dental distributor!

(Distributor incentives available. Please contact ADS to inquire.)