test
View CartCheckoutLogin
:: American Dental Supply, Inc. Manufacturers of Dental and Medical Dental Supplies ::
SALES AND LIMITED OFFERS
Trays
Accessories
Acid Products
Alloys
Adhesives Cyanoacrylates Cements
Digital 3D/CAD Perfect Products
Casting & Pressing Rings & Bases
Ceramic Pieces
Chrome Partial Department
Dental Models
Denture Department
Devesting & Polishing
Diamon-All® Premium Cutting Instruments
Die Materials
Enigma™ and EnigmaLife™ Premium Denture Teeth
Etching Gels & Labels
Felix Dental Products
Fluxes
General Chemicals
High Temperature Materials
Instruments
Investments
Operatory Supplies
Porcelain Department
Porcelain Palettes
Safety Supplies
Sprues
Ultrasonic Cleaners & Equipment Cleaners
Trays
Waxes
Porcelain Department: Lab® Universal Clear Glaze Enamel Kits, Liquid, and Powder - Lab® Universal Clear Glaze Enamel 1/2 oz. Kit - 1/2 oz. Powder and 1/2 oz. Liquid Media
Lab® Universal Clear Glaze Enamel 1/2 oz. Kit - 1/2 oz. Powder and 1/2 oz. Liquid Media
Lab® Universal Clear Glaze Enamel 1/2 oz. Kit - 1/2 oz. Powder and 1/2 oz. Liquid Media
Add To My Wish ListPrint View
Price: $71.47
Item Number:  410222

LAB® Universal Clear Glaze Enamel is not a typical porcelain glaze powder.

It is a "glazing" dental ceramic enamel which produces an illusion of "depth and naturalness" when fired on all the popular porcelain

systems.

It eliminates the grey effect sometimes seen with other glaze powders yet does not reduce the value.

Mix enamel powder and liquid media to a thin watery consistency.

Do not pre-mix glaze, but mix only as needed.

Be sure to use only the LAB Liquid Media for best results.

Clear Glaze Powder refills also available in 1/2 oz. and 4 oz. sizes.

Liquid Media available refills also available 1/2 oz. and 4 oz. sizes.

Quantity: Kit includes 1/2 oz. Powder with 1/2 oz. Liquid Media

Clear Glaze Enamel Instructions

LAB Universal Clear Glazing Enamel is not a typical porcelain glaze powder. It is a “glazing” dental ceramic enamel which produces an illusion of “depth and naturalness” when fired on all the popular porcelain systems. It eliminates the grey effect sometimes seen with other glaze powders yet does not reduce the value.

Mixing Instructions:

Mix enamel powder and liquid media to a thin consistency. Do not pre-mix glaze, but mix only as needed. Be sure to use only the LAB Liquid Media for best results.

Application:

Apply a very thin layer mesially-distally rather than vertically with a brush. The resulting “brush marks” will flow upon firing, developing subtle undulations enhancing the anatomy. Caution: Do not allow the glaze enamel to contact the metal surface and make sure the brush is clean prior to use.

Staining:

Add 10%-15% of this Enamel to the stain mixture and apply one coat, fire to the recommended temperature and glazing will result.

Firing Schedule

Dry Time: 4 minutes

Low Temp: 600° C / 1100° F

Vacuum: None

Heat Rate: 55° C / 100° F

High Temp: 937° C / 1720° F

Hold Time: None

The fusing range is 899° C / 1650° F - 1066° C / 1950° F



Add To My Wish List
| Accessories | Acid Products | Adhesives Cyanoacrylates Cements | Alloys | Digital 3D/CAD Perfect Products | Casting & Pressing Rings & Bases | Ceramic Pieces | Chrome Partial Department | Denture Department | Devesting & Polishing | Diamon-All® Premium Cutting Instruments | Die Materials | Enigma™ and EnigmaLife™ Premium Denture Teeth | Etching Gels & Labels | Felix Dental Products | Fluxes | General Chemicals | High Temperature Materials | Instruments | Investments | Operatory Supplies | Porcelain Department | Safety Supplies | Sprues | Ultrasonic Cleaners & Equipment Cleaners | Waxes |

© Copyright 2001. American Dental Supply, Inc. All Rights Reserved.

PositiveSSL_tl_trans.gif

This site is protected with Comodo 256-bit encryption to protect confidential data, (e.g. credit card information) during online transactions.

You are on a 128-bit SSL secured page.